Casa>Blog>What causes the PA loudspeaker to lose its sound
What causes the PA loudspeaker to lose its sound
August 30, 2022
The application of tweeters horn speakers in our daily production and life is becoming more and more frequent, and it can be seen almost everywhere. At the same time, everyone has higher and higher quality requirements for tweeter equipment. Some users find that tweeter equipment often loses sound during use. Fault, then what are the reasons for the failure of the speaker to have no sound? How to solve these problems?
The silent failure of the tweeter may be the open circuit of the voice coil and the disconnection in the voice coil, which is generally caused by poor product materials or man-made damage. In this situation, broadcast speaker manufacturers should pay attention to the quality of the voice coil before production. If the lead wire is easily broken, stop using it, and also check whether the voice coil wire is broken, short-circuited or open-circuited. Is there any disconnection in the place where the coil leads are drawn out? Only the quality of the voice coil can be used.
If the lead wire of the tweeter voice coil is not pressed well or the margin is not enough, it will easily cause the lead wire to be disconnected. During production, pay attention to the lead wire to be close to the Voice Coil Diaphragm; at the same time, let the lead wire form an S line along the paper cone or on the diaphragm. The cone part makes the lead wire of the voice coil hook out a semi-circle, so that there is enough margin, the lead wire of the horn speaker will not be straightened when the amplitude is on. , so it is necessary to control the welding time and let the solder fully melt. In order to ensure the firmness of the welding, it is necessary to check whether the tweeter voice coil lead wire and insulating paint have come off, whether the lead wire is oxidized or tinned before production.
If the tweeter uses too much current, the voice coil is burned out, or the heat dissipation effect is not good, resulting in excessive heat, burning the voice coil, or overheating and deteriorating the paint layer, etc., which will cause the tweeter to be silent. Listening and aging experiments are carried out according to the rated power of the tweeter itself. The voice coil wire used is selected from high temperature enameled wire, and the insulating paint, adhesive and skeleton are also made of high temperature resistant materials. For the heat dissipation method, choose the frame with better heat dissipation, the elastic wave with good ventilation, the bottom of the basin frame, the voice coil frame, the elastic wave, the cone of the diaphragm, and the heat dissipation hole of the T iron. To sum up, the loss of sound of the tweeter is mainly caused by various damages to the voice coil. You can refer to the reasons for maintenance and inspection during use. In addition, the broadcast speaker manufacturer also reminds everyone to pay attention to the aging of the equipment, discard it in time, and replace the tweeter with a new one to avoid the inconvenience caused by the loss of sound of the equipment.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
We will contact you immediately
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.